Select Type
|
Choose the method of specifying wind pressure values from the
drop-down:
- ASCE 7, IS
875, GB 50009, or
Custom – Code generated or user-entered
intensity values:
設定 | 説明 |
---|
Intensity vs. Height table |
Enter pairs of data for wind pressure at a
given height (in the current units). Int cells – 力/面積で表された風強さ(圧力)。タイプごとに最大100の異なる強さを入力ファイルで定義できます。
Height cells – 対応する強さが生じる全体垂直方向の対応する高さ。実際のY(Z upの場合はZ)座標で測定されます。
These values may be negative in the case of GB
50009-2012 wind loads. This indicates a ground
level below the base of the building. 注記: In this
case, the first row of the Intensity vs. Height is
used to simply indicate the ground level.
|
Generate |
Opens the code-specific wind load dialog,
which is used to generate a wind load per the ASCE 7, IS
875, or GB 50009 specifications (depending on code
selection). Input data on the type of structure,
surrounding terrain, and wind. |
- SNiP
2.01.07-85 or SP
20.13330.2016 – Russian wind load parameters:
設定 | 説明 |
---|
Pressure |
風圧の特性値(常に正の値)
|
Terrain |
地形粗度カテゴリ:
- 沿岸地域。
- 都市圏。
- 大都市。
|
Region |
SNiP 2.01.07-85* 2016の条項11.5に規定されている風域。動的な風の成分を決定する際に風圧を決定する目的で使用します。
|
Delta |
振動の対数減少、デルタ(定義については表11.5 - 条項11.1.8を参照)。通常、値は次のとおりです。
- 鉄塔、マスト、煙突群、鉄筋コンクリート台座を含む柱は0.15
- 鉄筋コンクリートおよび石造構造物、および壁構造がある鉄骨構造の建物は0.3
|
|